Видео

Mine is the same one and has the same results

Bring them back with outboard engines!

I 💯 agree with you about the cost of everything going up and our last couple of winters in southern ontario have been crap with little to no snow . Who wants to spend 1000s on a new sled with no snow

This helped me this morning.. Thanks. The choke swap wasnt easy - not clear on how to swap, wasnt sure how to put re-install with the knobs, but by chance, the PW worked.

Poppit valve?

Its the argon, use 75/25 bi mix for carbon. Argon is for s.s. and aluminum

It would’ve been a better video if you weren’t blocking the shot half of the time… But still good information thanks.

Thanks! What do you recommend people do who do not have those skills that you have? I would not know how to do any of that stuff I can buy the material but no clue who to ask to do this lol

Soon This Comment Will Be old.

Soon This Comment Will Be old.

Soon This Comment Will be Old.

Soon This Comment Will Be old.

Soon This Comment Will be Old.

Soon This Comment will be old.

What's the mpgs when towing the A frame?

ITS NOT A JET BOAT IF AINT GOT NO JET PUMP YOU DORK...LOL

Did you get this Mercury V6 over heat figured out? It sounds like you have compression leaking into the cooling jackets. could be a crack cylinder. I can tell you how to isolate the problem. I'll check back, if you respond I'll talk to you.

Grind the paint off dude

I tore off the entire roof, I ordered new panels and TPO roof and that’s what I’m doing

Awesome car, great tutorial, and a fucking excellent backing track. 10 out of 10! I need to do this with my '99, it's been sitting for over a year 'cause it won't go into reverse. It's been a "some day" thing for so long, I need to finally act on it.

Snowmobiled all my life in northern Wisconsin. I’m 60 years old and sold my snowmobiles due to lack of snow. I really miss it.

I feel like some rear wheel spacers would fix the width issue while driving in deeper snow, just picked up a insight myself

Great video. I particularly enjoyed the fact that you didnt shy away from the polution topic. I run 90's seadoos so I too often think of that, but I agree with your assessment.

No bathroom? Other then that I like it.

Did the rs2 step to my 100 s4 c4 sedan back in the day. It really is all you need to have a super fun daily driver!

you have completely missed the history of the QC4V. First it was the 1350. Then it was the 1100. Then it was the 1650 race version, which became the 1750 race version. Then the 860 and Class 1 N/A version. At this time we also got the two dual cal engines, of which the 1350/1550 was first, then the 1100/1350. And they are produced to this day, not from 2003 to 2013. They debuted in 2011. The V8 outboards debuted in 2018, not 2010.

Dude, the Deuces High was ALWAYS cool. 2017? You're late to the party.

Well, I know absolutely nothing about power boats, so this has been very interesting for me. I’ll be honest 200 BHP doesn’t sound much for a racing boat However I’m probably basing that on a car. Having said that, this is on water, which I would imagine is quite a bit different to a road or race track

Fiberglassover wood, if that wood is damaged it till cost more to fix than that its worth

I purchased a big block 1988 pachange 22 brand new in 1990. Awesome boat. A friend of mine had a twenty two and a family member also had a twenty two. Those were the days. It was a mobile dance platform for the ladies. :)

You need a 15 hp. 1968 Merc

Is that a factory lip on there?

It's been nearly two years since an update on this sea flea! You've upgraded boats using Space Age Materials! You've attempted offing yourself with CO! Maybe even a couple other things since then! Anyway, get this sucker fired up and SENT IT!

Applying heat to the bearings will facilitate it's removal.. Both bearings should be replaced for that much trouble.

I think the 400R is missing

I watched e1 so slow

you always know its a merc. when it wont krank johnson first pull

Throttle body .mas air flow sensor .volt reg.dist pick up .

we cant forget OMC's rotary race engine, which SCARED THE CRAP out of mercury.

Yep, it's a joke..... most property owner type Lakes with speed limits, around here those property owners have massive Wakeboard Boats that putt along slowly with Ballast tanks creating absolutely huge 'wakes' to surf on ? How about some 18" Wake Laws ?

Great video! Thank you!

you can thank Al Stoker (Stoker Sport Tunnel) for designing and building that boat. He ended Hydrostreams reign as the fastest boats in Mod VP with that hull. I had one beat my Viking with one until I put a 200 Black max on it and before working on the engine it went 10 mph faster. Ive seen SSts with Merc Mod VPs running over 100 mph. Theyre stable and very fast compared to a Hydrostream and wont chine walk. Nice boat by the way, I love watching the vid.

Yes !

99 Astro deep pan and i was hoping just to order the pan with the valve already in it BUT reviews on both when you search Safari or Astro only come up with didnt fit remarks and wonder maybe they had the shallow versions or if anyone has tried the ones linked above? thanks for info and video

Government was going to outlaw 2 strokes but so many people swapped theirs out for one of the new four strokes the government didn’t need to follow through with the ban. Which I’m glad for because I still run my 1986 85 Horse Suzuki on my fishing boat.

Wow, No footers and just sitting on concrete pavers. Have fun when the ground freezes. I would've done poured footers for sure and have the frame start 20" off the ground to help avoid winter snow and give you room to insulate later if you want.

lol you don’t want all Renogy products so now your going to go all Victron? I have all Renogy and can monitor my system remotely. Should have gone all Renogy so then you can really compare apples to apples if you go all Victron.

Every time i heard the sound of that 2 stroke i ran to my gramdmas staircase and stared as they took off out of the channel man the 90s what memories

😊😊😊😊😊😊😊😊😊😍😊

Is Bridget the same as piston port? I'm familiar with snowmobile engines